CS11 thread free floating ball steam trap, internal thread steam trap product introduction

Free floating ball steam trap is a mechanical steam trap with continuous drainage and stable performance. It has good air tightness and long service life. It is a technically mature product, which is suitable for various process heating equipment, especially drum drying equipment (with siphon type) with high process requirements.

Product features

1. The built-in automatic air exhaust device can exhaust air close to the saturated steam temperature, solve the phenomenon of air resistance, and improve the starting efficiency of the equipment.

2. Even when the condensate load changes, the condensate can be continuously discharged to ensure the temperature required by the process.

3. The floating ball structure avoids the problem of centralized wear of the valve opening and closing parts. It can be used as the sealing surface at any angle and has a long service life.

4. After fine grinding, the roundness error of the floating ball is less than two thousandths of the diameter to achieve efficient sealing.

5. The valve seat is designed to be under the water surface to form a water seal, which will not leak steam even under low load conditions.

6. The built-in filter with large flow area can replace internal parts and clean impurities online, which is convenient for maintenance.