Working principle of ft14h lever floating ball steam trap

When the t14h lever floating ball steam trap is just started, the automatic air exhaust device quickly removes the non condensable gas in the system. When steam and hot condensate enter, the temperature in the valve chamber increases, and the exhaust device automatically closes. The floating ball rises and falls according to the change of condensate water level, driving the lever to adjust the opening of valve seat hole and continuously discharge condensate. When the condensate stops entering, the floating ball drops by its own weight, driving the lever to drive the stuffy core to close the drainage valve seat hole.

Ft14h lever floating ball steam trap is used in steam heating equipment, condensate recovery system and working conditions requiring rapid removal of condensate. It can automatically, quickly and continuously remove condensate, effectively prevent steam leakage, and obtain the best heating effect.

T14h lever floating ball steam trap product features:

1. The heating equipment can continuously discharge saturated condensate without water accumulation, so as to obtain the highest thermal efficiency.

2. When the steam pressure changes, it will not be affected. The floating ball drives the lever to automatically adjust the opening of the valve seat hole, which works continuously and has stable performance.

3. Good air exhaust performance. The automatic air exhaust device can eliminate non condensing cold and hot gases, without air lock, and work smoothly without noise.

4. Excellent sealing performance. The seal adopts spherical structure, which has no centralized wear during operation and long service life.