Es5 (8,10) F-type bell float steam trap, inverted bucket (cs45/15h) trap wear-resistant SCCV closing mode:

SCCV Jiang. Closing system is the English abbreviation of self closing and center ring valve system, the same below. This closing method breaks through the traditional design, and cleverly uses the suction when the condensed water and soil flow out and the pressure in the valve to close the valve core. The valve core has a retarding effect in the closing process and reduces the wear between the valve core and the valve seat.

Characteristics and performance of Es5 (8,10) f bell float inverted bucket drain valve:

1. It has strong adaptability to the amount of condensate. It can be discharged intermittently. The fork can be discharged continuously.

2. Unparalleled SCCV closing system, unique design, with compensation lever mechanical production

It can avoid the rigid collision during closing. The closing is very reliable and has a long service life.

3. All internal parts are made of stainless steel and installed on the valve cover for maintenance

Extremely convenient.

4. High back pressure rate. (9 0％)。

5. The steam water separation is reliable (the steam water enters from the lower part of the valve through the U-shaped channel), and the inside of the valve is always in

Water seal state, effectively preventing steam leakage.

6. The open mouth shaped float resists water hammer. The bucket is equipped with overflow vent, which can effectively prevent steaming

Steam lock and air blockage. (non condensing high-temperature air can also be excluded).