Sj611w-16p pneumatic angle regulating valve, welded pneumatic angle seat valve

 Overview of pneumatic angle seat valve

Sj611w-16p series pneumatic angle seat valve is a new generation of pneumatic angle seat valve developed by Hongfeng valve company with the latest introduction of foreign advanced production technology and combined with modern industrial applications. It is widely used in food and chemical processes, sterilizers, high-pressure sterilizers, dry cleaners, clothes dryers, beer production lines, etc.

 Characteristics of pneumatic angle seat valve

1. Visual position indication: it can be connected with limit switch or emergency manual device.

2. Easy to install: the pneumatic head can rotate 360 'and even the limit switch can rotate 360'. One or two limit switches can be easily installed.

3. Advanced pneumatic controller: thickened engineering plastic shell, safe and reliable. Low wear piston structure, large capacity and low air consumption. Internal components are self-lubricating and maintenance free.

4. It has a variety of control modes: normally open, normally closed and double acting.

5. Smaller pneumatic actuators are required: when the fluid flows from above the valve stem, the head is made.

6. Easy connection: mamur standard connection, embedded metal connector. Smaller control heads are available.

7. Long life guide rod: the valve rod is sealed with wedge shaped Teflon (PTEE) to avoid the introduction of dirt. Self lubricating, maintenance free. The valve rod is specially treated to ensure the best fixation and can automatically correct the position.

8. No water hammer: when the fluid flows under the valve stem, the water hammer (water impact) is absorbed.

9. Advanced valve body mechanism: the flow is 30% larger than the ordinary corner seat, the volume is smaller, and the fluid flow pattern is better. Stainless steel 316 valve body, teflon seal, high temperature resistance, corrosion resistance. The service life is up to seven million times

 Technical parameters of pneumatic angle seat valve

Pressure range: 1.6Mpa

Medium temperature: - 10 ℃ ~ ＋ 180 ℃

Ambient temperature: - 10 ℃ ~ ＋ 60 ℃

Valve body material: stainless steel

Sealing material: polytetrafluoroethylene

Actuator housing: polyamide

Control medium: neutral gas, air