Characteristics of g61f-10s socket type UPVC Plastic Diaphragm Valve:

The most prominent feature of g61f-10s socket type UPVC Plastic Diaphragm valve is to separate the inner cavity of the lower valve body from the inner cavity of the upper valve cover, so that the valve stem, valve disc and other parts above the diaphragm are not corroded by the medium, eliminating the packing sealing structure, and will not produce medium leakage. G61f-10s socket type UPVC Plastic Diaphragm valve adopts the diaphragm made of soft seals such as rubber or plastic, which has good sealing performance.

As the diaphragm is a vulnerable part, it should be replaced regularly according to the characteristics of the medium. Limited by the diaphragm material, the diaphragm valve is suitable for low pressure and relatively low temperature occasions. G61f-10s socket type UPVC Plastic Diaphragm valve can be divided into six types: house type, DC type, cut-off type, straight through type, ram type and right angle type; The connection forms are usually flange connection, socket connection, union connection, adhesive, and can be divided into manual, electric and pneumatic according to the driving mode, of which pneumatic drive is divided into normally open, normally closed and reciprocating. G61f-10s socket type UPVC Plastic Diaphragm valve is generally not suitable for pipelines with temperature higher than -20 ℃ -95 ℃ and transporting organic solvents and strong oxidizing media, nor for pipelines with high pressure.

Description of g61f-10s socket type UPVC Plastic Diaphragm Valve:

Application scope and structural characteristics of g61f-10s socket type UPVC diaphragm valve: it is applicable to the transportation of corrosive media, closure and flow regulation. The service temperature is -20 ℃ ~ 95 ℃ according to different materials. The flow passage parts are assembled by UPVC injection molding parts, with excellent corrosion resistance, convenient operation and light volume, which can replace stainless steel valves.

G61f-10s socket type UPVC Plastic Diaphragm valve seal diaphragm is made of F46 or PFA, with folding times ≥ 1200, and corrosion resistance equivalent to F4. G61f-10s plug-in UPVC Plastic Diaphragm valve adopts screw lifting structure, with large opening and closing torque and good stability. Applicable fluids: water, air, oil, corrosive chemical liquids. For example: pure water and raw drinking water pipeline system, drainage and sewage pipeline system, brine and seawater pipeline system, acid-base and chemical solution system and other industries.